The construction process of FRP desulphurization tower anti-corrosion engineering project is roughly divided into. The actual construction of the anti-corrosion engineering project of FRP desulfurization tower is divided into the following several processes. Before construction, ensure that the concrete ground is completely dried and the foundation is smooth, and then carry out the work of painting with bright oil brush. Prepare raw materials and construction machinery and equipment for anti-corrosion engineering project of FRP desulfurization tower in advance.

The actual construction process of FRP desulfurization tower is that the bottom coating agent is brushed again after solidification, the glass cloth is coated with a layer of epoxy resin, the glass cloth is coated with a layer of glass cloth, and the glass cloth is coated with a layer of glass cloth, and the glass cloth is finally brushed with epoxy resin again. Product maintenance: because the construction of natural environment into the pool irrigation class, adverse epoxy resin solidification molding, glass fiber reinforced plastic desulfurization tower must require 48 hours of solidification time, to be completely solidified can be applied.

FRP desulfurization tower construction work temperature for 5-25 ℃ advisable, air humidity should not exceed 8%, glass steel desulfurization tower anticorrosive engineering project construction is not optimistic query on the ground before foundation whether level off, in the case of the earth is not completely dry unable to carry out construction because of the ring was found in the basement so when necessary with natural ventilation and low voltage lighting lamps and lanterns. Concrete surface should be firm, dense, smooth, should not have sand, shell, cracks and other conditions. The foundation of the reservoir cavity shall be coated with concrete at one time, and the positive Angle line shall be made into inclined Angle or arc to facilitate construction.

During the construction of GLASS fiber reinforced plastic desulfurization tower, preventive measures must be taken in advance for glass fiber reinforced plastic desulfurization tower: because the commonly used raw materials for construction are inflammable, all the construction staff entering the construction site are not allowed to smoke and fireworks are prohibited. Construction staff on the spot to follow all kinds of management systems, follow the contractor organization. In the completion of the brush glaze must be equipped with exhaust fan on the spot to carry out the fresh air supply system to persist in fresh air in the reservoir, or wear a gas mask to facilitate stronger construction.

Glass fiber reinforced plastic desulfurization tower is a kind of machine equipment that uses the contact of water and air to dissipate the temperature of equipment formed in industrial production or refrigeration according to the volatilization effect. The basic concept of FRP desulfurization tower is: dry (low dew point temperature) air through the centrifugal fan convulsion, from the air supply network into the inside; The saturated water vapor in the GLASS fiber reinforced plastic desulfurization tower is divided into the high temperature water with too much pressure to the low air flow and cold and wet (high dew point temperature) water direct channel water system software into the tower. When water and air to touch, on the one hand, because the air heat transfer at the same time, with no glass steel desulfurization tower, on the other hand because there between water surface and air pressure difference, cause the volatile situation, while under the effects of many volatile heat of vaporization to the present stage to go, will water the calorific value of the evaporating heat transfer, thus achieve the purpose of reducing temperature.

Glass fiber reinforced plastic ring down streaming the running time of the desulfurization tower for example FRP desulfurization tower water separate mainframe through centrifugal pump at a certain burden through the line, horizontal throat, throat, glass fiber reinforced plastic core throat desulfurization tower will loop system pressure to the water system, according to the small round hole on the seeding water pipe water symmetry spreading over filling material; FRP dry desulfurization tower is a low Han values under the effect of the air blower in the bottom into the duct into the tower, the water flows through the filler surface shrinkage of water and air are produced when conducting heat exchanger, glass steel desulfurization tower high environmental humidity yoake value to pull the heat from the top, drop into the bottom basin, glass steel desulfurization tower through the drain into the server.